kingpincooling.com

Go Back   kingpincooling.com > Overclocking & Modding > Shamino's Lair

Shamino's Lair The master himself, Shamino.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-19-2016, 03:54 PM
strongisland1 strongisland1 is offline
Sub-Zero
 
Join Date: Jul 2013
Posts: 145
Default RAMPAGE V EDITION 10 OWNER'S THREAD

WELCOME TO THE ASUS RAMPAGE V EDITION 10 OWNER'S THREAD


- THIS BOARD WAS SPECIALLY MADE TO CELEBRATE ROG'S 10TH ANNIVERSARY



OVERCLOCKING TOOLS & SOFTWARE

* BIOS 0051
(per-core voltage support on BWE, if used don't enable Fully Manual Mode or Adaptive Mode)

* TurboV Core 1.01.08

* X99 Per-core ratio v09

* Turbo Boost 3.0

* MEM Tweakit V2.02.25

* ROG Connect Plus 1.00.35

* OC Panel Firmware

* MEI



BIOS Files -

* BIOS 0051
(per-core voltage support on BWE, if used don't enable Fully Manual Mode or Adaptive Mode)

* BIOS 0401

* BIOS 0502

* BIOS 0601

* BIOS 0801

* BIOS 0901

* BIOS 1003


EXTREME OVERCLOCKING SECTION


EXTREME OVERCLOCKING GUIDE
ASUS RAMPAGE V EDITION 10
BENCHMARKING BROADWELL-E


Expectation on Ambient
4.4Ghz Core @ 1.4Vcore, above 1.4V not recommended
3.7Ghz Cache @ 1.35Vcache, above 1.4V not recommended

Expectation on LN2
5.2Ghz Core @ around 1.55v set @ ~ -95C
4.4Ghz Cache @ around 1.65v set
CPU mostly maxed out around 1.55v to 1.65v set.
CBB usually around -90C. CB around -95C to -100C
Voltages you need to be concerned with = Vcore/Vcache and CPU Input (~ 2.2v is
enough)

DRAM Channel ranking
CHC (3700+)
CHD (3700+)
CHB (~3600)
CHA (~3500)

Benchmarking pointers
1. Try starting off with Moderate LN2 profile in the OC Presets.
2. CPU ratios may not always apply when changing in OS but you can try
x99_pcratio tool that keeps retrying till it sticks.
3. CPU ratio is sometimes stuck to 35x at boot, always check the applied ratio.
4. Itís difficult to boot into OS with close to max cache.
5. Some CPUs donít like to be too cold when entering OS.
6. Boot with at least 39x cache ratio on LN2 mode to engage proper auto rules.
7. PLL Termination voltage may help if experiencing PCIE Gen3.0 stuttering.
Additionally may help improve cold bug up to 5C. Quantized behavior so try in
steps: 1.63v, 1.75v, 1.85v, 2.2v, 2.4v 2.6v, 2.8v.
8. DMI Skew may improve DMI frequency upwards by setting values of -3 to -6.
9. In 4 way by default VGAs will run at x8/x8/x8/x8 and leave x8 for I/O. To run
x16/x8/x8/x8 go into onboard devices and set 4-way config to below.




10. To use VGA card on the PCH X4 slot, go into BIOS, onboard devices and set
config as below.




Extras
New Turbo Boost allows you to adjust ratios by specific cores, the asterisk refers to
the core Intel determines to be the best during production. To boost performance of
lowly threaded apps, install the Turbo Boost 3.0 app/driver and it will prioritize the faster cores.



OVERCLOCKING GUIDES -


Memory Overclocking Guide
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:20 AM.

Contact Us - www.kingpincooling.com - Archive - Top
Powered by vBulletin® Version 3.8.3 Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.