kingpincooling.com

Go Back   kingpincooling.com > Overclocking & Modding > Overclocking

Overclocking Overclocking results and KPC hardware pron

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-17-2014, 02:58 PM
Themady Themady is offline
Ambient
 
Join Date: Sep 2014
Posts: 10
Default ASUS Maximus III Formula/TurboV software

Heads up for extreme overclockers using the ASUS Maximus III Formula with the Clarksdale CPU's.

There seems to be some incompatibility in the TurboV software when overclocking, when pushing Blcock the system will lock and change registers for VTT, PLL, and Dram.
Am not sure if this problem is apparent for normal usage/air or water overclocking, but for extreme use please note that you could run into problems with your CPU's when using the turboV software to raise the Bclock.

See picture below that clearly shows the registers changed from a setting of 1.35VTT and 1.7VPLL to 1.1VTT and 2.5PLL, when pushing Bclock, which will without any doubt will have a detrimental effect on your CPU.


I have been told that ASUS are working on a fix for this problem but in the mean time please be aware that using the old TurboV software could be detrimental to your CPU when pushing Bclock.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:16 PM.

Contact Us - www.kingpincooling.com - Archive - Top
Powered by vBulletin® Version 3.8.3 Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.