View Single Post
  #4  
Old 06-30-2015, 08:01 PM
strongisland1 strongisland1 is offline
Sub-Zero
 
Join Date: Jul 2013
Posts: 145
Default

Quote:
Originally Posted by Dolk View Post
Alright so re-ran the tests.

I saw that when the drivers dropped, the Vcore dropped from 1.465 to ~1.4V. I had it connected to a ~$20 meter so the Vcore probably dropped lower than 0.07V.

I tried a couple different BIOS but none of them would work.

Could be a bad core? Did I miss something during Epower mod? I followed the Titan Epower guide here, but it should work for Titan X. At least so far its been doing well except for this hard block.
that mod guide is for titan x, so you did ok there. How cold are you going and what voltage does the card get when epower set to 1.465v. Maybe you just need to go colder with higher volts.

Last edited by strongisland1; 06-30-2015 at 08:04 PM.
Reply With Quote