View Single Post
  #2  
Old 06-28-2015, 11:25 PM
TiN's Avatar
TiN TiN is offline
Volt-Nut :)
 
Join Date: Jan 2010
Location: Taipei
Posts: 1,458
Send a message via ICQ to TiN Send a message via Skype™ to TiN
Default

Sounds like BIOS issues to me. Usually Titans can do ~1.6G or 1.7G even with stock VRM and simple resistor vmod to 1.3-1.4V.

You using correct firmware, there is only one for EPOWER, and it's V25.
To know if it's OCP or not it's usually very simple - if your output voltage drops to zero after high loading (for example when benchmark start running) - then that's OCP. If your voltage stays fine on what you set - it's not an OCP.

Try different BIOSes to see if anything changes.
__________________
xDevs.com
Reply With Quote