View Single Post
  #3  
Old 01-16-2017, 08:16 PM
k|ngp|n's Avatar
k|ngp|n k|ngp|n is offline
PURE
 
Join Date: Aug 2009
Posts: 1,230
Default

Back in 2001 or so before I started using LN2, I used a dual phase change setup on the gpu and cpu. I should dig around for pics..LET was what I used and It ran perfect everyday for hours and hours with constant temps -45c ish on gpu.

I think in your situation LET would be perfect. Put two coats on the card starting between the vrm and gpu and go all the way to the end of he card (I/O side). Do this on front and back and you should be good.
Great work btw..
Reply With Quote