kingpincooling.com

kingpincooling.com (http://forum.kingpincooling.com/index.php)
-   Shamino's Lair (http://forum.kingpincooling.com/forumdisplay.php?f=23)
-   -   Matrix GTX 980 Tips (http://forum.kingpincooling.com/showthread.php?t=3026)

hiwa 12-18-2014 08:39 AM

Matrix GTX 980 Tips
 
http://www.ocaholic.ch/modules/xcgal...atinum-001.jpg
http://www.ocaholic.ch/modules/xcgal...atinum-006.jpg
http://www.ocaholic.ch/modules/xcgal...atinum-015.jpg
http://www.ocaholic.ch/modules/xcgal...atinum-030.jpg
http://www.ocaholic.ch/modules/xcgal...atinum-082.jpg
http://www.ocaholic.ch/modules/xcgal...atinum-083.jpg

Quote:

Originally Posted by coolice (Post 28542)

Quick Matrix GTX 980 Tips :
Try your card on air to see max Memory Frquency then Flash the Bios mine is M980_87.rom
1. Black Screen at -90 with DVI use HDMI ( -120 OK)
2. Apply Voltages and Frequencies at -95 otherwise Artifacts and memory Problem
3. Torch your pot at -80
4. Easy benching at -140
5. Problem when comes in IDLE( when benchmark finishes) sometimes you need to warm up till -70.
6. tried 1.25 PLL , 1.75 Vmem and 1.6x Vgpu
7.HotWire works perfect
8.Matrix Controller Works Perfect
9.GPUtweak Works Perfect
10.Enable Memory Defroster always

http://www.ocaholic.ch/modules/xcgal...atinum-071.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-064.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-051.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-057.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-056.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-058.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-056.jpghttp://www.ocaholic.ch/modules/xcgal...atinum-073.jpg

Please share if you have more tips and if all these work also with you, i tested 1 card only.

:clap:

nacho_arroyo 12-18-2014 11:03 AM

Good info, thanks for share it man!

Gunslinger 12-18-2014 04:26 PM

Good idea for a thread Hiwa! I'll be freezing mine soon.

Dancop 12-18-2014 07:33 PM

I froze mine today...

http://abload.de/thumb/screen036jnq6v.jpg

DEF not what I expected---maybe my bought one runs better

nacho_arroyo 12-20-2014 10:10 AM

Good run Daniel, what are u expecting ?? arround 2.3GHz :O hahehehe

Good work!

mortisboy 12-22-2014 09:25 AM

Very nice Hiwa, i'll test again mine with fixed bios to see if is any better.

hiwa 12-22-2014 10:04 AM

Nice run Daniel
Would be nice if we add more info to each screen we post.

Dancop 12-23-2014 07:24 AM

For instance, you described all the important things.
Just one more to add....start with low clocks like 2050 and then raise it in 25 Mhz steps - benching the card warm I say!

Dumo 01-19-2015 03:18 AM

All above @ Hiwa's first post

No problem using dvi/vga adapter, memdefrost @ all time and gputweak works perfectly.

Testing bios M980_90.rom @ 1.6V+/1.68V/1.2V

http://i.imgur.com/kTMBZ1Zl.jpg

http://i.imgur.com/ZAkuxqsl.png

hiwa 01-19-2015 04:20 AM

nice ultra Dumo.


All times are GMT -5. The time now is 06:00 PM.

Powered by vBulletin® Version 3.8.3 Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.