-   TiN's Dungeon (
-   -   Flash Evbot with I2c/usb converter (

RULE 12-11-2013 01:55 AM

Flash Evbot with I2c/usb converter
Hi Tin, i'm new here.
I'm i would like try to flash my Evbot with a I2C/USB converter

With something like this is possible the conversion work fine?

I've found this pin diagram online is it correct?

Thank you in advance

TiN 12-11-2013 09:20 AM

Pin diagram correct, but you will need to write own software for flashing in such case,
as EVGA flashing software supports chipset SMBus or NV I2C interfaces only.

RULE 12-13-2013 01:37 PM

so what's the fastest way without an evga card?

TiN 12-14-2013 01:27 AM

Hook to X79 motherboard or NVIDIA 600/700 series GPU SMBus and use EVGA EVBot software to flash it. Lot of NV reference cards with CHIL PWM have SMBus connector pads near VRM area

RULE 02-14-2014 10:09 AM

It's all day long i'm trying to flash the Evbot, i've direct soldered on sdata and sclk spot of a gtx 780 using a asp1212.
I have try all the software i've found online one of them return this:

Please help is realy a waste of time, you guys must find a easy way for the comunity, is not possible have so many trouble....

TiN 02-16-2014 06:06 AM

Did you enable flash mode on EVBOT? (Hold power button till FLASH mode show on display)

RULE 02-16-2014 10:26 AM

yes, trust me TiN i've tried all the ways.
Maybe the 0xb0 adress is already busy on my card.
Anyway tomorrow i send the EvBot to a mate, he will try with her EVGA graphic card.

All times are GMT -5. The time now is 09:27 AM.

Powered by vBulletin® Version 3.8.3 Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.