-   Shamino's Lair (
-   -   X58 4-way Classified - Error code 25 (

SiriusDragon 10-31-2016 07:40 AM

X58 4-way Classified - Error code 25
Hey Shamino,

Not sure if you're still around but if you are I was wondering if you know of how to fix a post code 25 error on the old X58 4-way Classified.

It's a lovely motherboard and I'm kinda worried I managed to kill it so I hoped you maybe had some ideas on how I could resurrect it :(

Basically the problem started when I used PCB lacquer to insulate the motherboard but didn't mask off stuff like the slots and CPU socket properly so they got gunked up *face-palming* Everything seems to be fine but it just gets stuck at that error code 25 so I'm wondering if I managed to break it entirely or if there's hope to recover it :(

SiriusDragon 10-31-2016 11:10 PM

Ok so now sometimes it goes past error 25 but then hangs on 7F with 1 long beep and 2 short beeps :(

DR4G00N 11-03-2016 01:45 PM

Sounds like it's not detecting a gpu, maybe some of the slots contacts are dirty. Try taking an old gpu and seat it in the slot and then remove it ten times or so.

Also are you using the first pcie slot?

TiN 11-05-2016 03:58 AM

If it's got into cpu socket, you are in deep rabbithole now. Try to dissolve it with acetone outdoors to keep fumes away.

All times are GMT -5. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.3 Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.